2. The machine should be placed in dry and clean indoor use, may not contain acids in the atmosphere and other corrosive places on the body to use.
3. After the machine is used or when it stops, the rotating drum should be removed for cleaning and cleaning up the remaining powder
4. When the drum moves back and forth, correct the M10 screw on the front bearing to the appropriate position. If the gear shaft breaks, correct the M10 screw at the back of the bearing rack to the appropriate position. Adjust the clearance so that the bearing does not sound, hand belt pulley, the appropriate tightening is appropriate, too tight or too loose may cause damage to the machine.
5. If the deactivation time is longer, the machine must be cleaned all over the body. The smooth surface of the machine must be coated with rust-proof oil and covered with cloth.
