Description: Only proper use and daily maintenance equipment can improve production efficiency. So how to properly use and maintain the feed pellet machine?

 

　　The feed pellet machine is widely used in large, medium and small aquaculture, grain and feed processing plants, livestock farms, poultry farms and individual farmers.

 

　　According to the product classification, the feed pellet machine can be divided into: poultry feed pellet machine, fish feed pellet machine, pet feed pellet machine, only the correct use and daily maintenance equipment can be used for a long time, thereby improving production efficiency, then how to use correctly and routine maintenance?

 

 

　　1. Maintenance of pellet machine: Check each time before use, check each transmission component, instrument, valve, and remove iron filings from the iron.

 

　　2. Use high quality ring mold and pressure roller. Inferior ring molds with rounded holes and rough inner holes are eliminated, and the compression ratio of the ring mold is selected according to different formulas to ensure smooth discharge of the ring mold, avoiding increase in power consumption and reducing production capacity.

 

　　3. The raw materials must be done in addition to iron and impurities, clean the iron removal device every shift, to avoid foreign matter into the ring mold work chamber, resulting in the phenomenon of body vibration and cracking ring mold.

 

　　4. Eliminate overload production. The production process can not exceed the working capacity of the granulator itself, otherwise the motor damage and the accelerated wear of the parts will occur, shortening the service life of the granulator.

 

　　5. Repair and replacement of the sieve machine of the feed pellet machine. The screen is made of sheet steel or iron. When the screen is worn or broken by foreign matter, if the damage is not large, it can be repaired by riveting or soldering; if the area is damaged, the new screen should be replaced.

 

　　6. Feed pellet machine equipment tooth and hammer replacement. Among the pulverized parts, the pulverizing claws and the hammer pieces are the wearing parts in the feed pulverizer, and are also the main components affecting the pulverizing quality and productivity.

 

　　Here, I introduce a feed pellet machine with high production efficiency, wide product range and convenient operation.